Download this file and save to 3 1/2" floppy disk:   IgnitionChart

After saving file, leave the floppy disk in your drive then:

1) From "Start" menu, select "Run" then "Browse" and select drive "A"

2) Select "Setup" then "OK"

After installing IgnitionChart™ you will need to make up this cable to connect your PC to the ProStrip® ECU:

PC to ProStrip® Connections (Note: Cable NOT supplied by AutoChart, Inc)

PC                         ProStrip®
9 Pin                      15 Pin

2--------------------------14
3--------------------------15

5--------------------------5

All other pins - No connection (Also see IgnitionChart™ menu item "Info")